Aluminum 4X4" Mounting Load Distribution Plates (Washers, Brackets) - Set of 4
$36.00
A one-time price of $36.00 will be added to your order.
We developed these plates especially to mount heavier equipment on truck and trailers for use in harsh chemical or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.
- 4" wide x 4"long x 1/4" thick (3 Gauge) heavy duty and anti-corrosive aluminum
- Proprietary design with 2 holes 1/2" each for more options in placing equipment:
---> Center hole is preferred hole for best weight distribution
---> The hole closer to the edge allows you to install the plate close to obstructions under the trailer or truck beds (such as cross members)
- Hand finished and individually inspected for quality
- 4 Plates in each order
- Other fasteners (such as washers, bolts, nuts) not included with purchase.
See full description for installation videos and more details.
- 4" wide x 4"long x 1/4" thick (3 Gauge) heavy duty and anti-corrosive aluminum
- Proprietary design with 2 holes 1/2" each for more options in placing equipment:
---> Center hole is preferred hole for best weight distribution
---> The hole closer to the edge allows you to install the plate close to obstructions under the trailer or truck beds (such as cross members)
- Hand finished and individually inspected for quality
- 4 Plates in each order
- Other fasteners (such as washers, bolts, nuts) not included with purchase.
See full description for installation videos and more details.
Manufacturer: FLOWTECHSYS
- Description
- Specifications
ALUMINUM 4X4" MOUNTING LOAD DISTRIBUTION PLATES (WASHERS, BRACKETS) - SET OF 4
We developed these specialty plates to mount equipment on truck and trailers for use in harsh chemicals or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.
- The plates are especially useful when:
- harsh conditions cause trailer or truck beds to deteriorate quickly allowing regular washers and bolts to come through the bed, thus failing to hold the equipment.
- traveling on roads where equipment is subjected to strong sideways or back to front movements that can pull regular washers and bolts through the bed, causing equipment to come loose.
- 4" wide x 4"long x 1/4" thick (3 Gauge) heavy duty and anti-corrosive aluminum
- Proprietary design with 2 holes 1/2" each for more options in placing equipment:
- Center hole is preferred hole for best weight distribution
- The hole closer to the edge allows you to install the plate close to obstructions under the trailer or truck beds (for example cross members)
- We recommend 3/8" bolts, flat washers, nuts, and nyloc.
- Hand finished and individually inspected for quality
- 4 Plates in each order
- Other fasteners (such as washers, bolts, nuts) not included with purchase
Installation Videos: Here and Here.
Shipping: Typically ships within two business days.
Interested in a custom size or a larger order? Call us at 713-370-7033 or email us at sales@flowtechsys.com.
Designed and fabricated in our Houston, TX facilities. Brackets
Dimensions:
- 4"w x 4"l x 1/4" h
- 2 x 1/2" mounting holes
Material
- 3 Gauge (1/4 inch thick) corrosion resistant aluminum
Recommended hardware
- 3/8" bolts - select the length that works best for your application
- 3/8" flat washers
- 3/8" nuts
- 3/8" Nyloc nuts
Related Products
-
￩￫
Aluminum Mounting L-Shaped Shift Prevention Brackets - Set of 4
$55.00STRONG AND ANTI-CORROSIVE 1/4 INCH ALUMINUM
The plates are especially useful when full tanks must travel on roads where equipment is subjected to strong movements.
- 3" wide x 3"tall x 5" long x 1/4" thick (3 Gauge)
- 2 mounting holes 7/16" each
- Heavy duty and corrosion resistant 1/4 thick aluminum
- For 3/8" bolts or smaller
- Hand finished and individually inspected for quality
- 4 Plates in each order
- Cost effective and easy to install
- Fasteners (such as washers, bolts, nuts) not included with purchase.
- We recommend using stainless steel fastener for best corrosion control.
See full description for more details.Maximum quantity exceededMinimum purchase amount of 0 is requiredAluminum Mounting L-Shaped Shift Prevention Brackets - Set of 4
$55.00Successfully Added to your Shopping CartAdding to Cart... -
￩￫
Bekyns Stainless Steel Band Straps for 125 Gallon Horizontal Leg Tank - Set of 2
$129.00ANTI-CORROSIVE INDUSTRIAL STAINLESS STEEL, STRONG, DURABLE, SPACE-SAVING, LOW-PROFILE, EASY TO INSTALL
--> Made of strong 3" wide 16 gauge stainless steel for strength, durability, and corrosion resistance
--> 16 Gauge is the thickness of a quarter
--> Low profile, semi-rigid and space-saving
--> Dimensions: 80" x 3"
--> Compatible with 125 gallon Ace Roto-Mold, Norwesco, and Chemtainer horizontal leg tanks
--> Easy to install on your vehicle's deck with J bolts
--> Set of 2 straps, J bolts included
--> Tank not included in purchase
Installation: We recommend installing with our specialty hardware: load stabilizing plates and shift prevention brackets.
See full description for installation video and more details.Maximum quantity exceededMinimum purchase amount of 0 is requiredBekyns Stainless Steel Band Straps for 125 Gallon Horizontal Leg Tank - Set of 2
$129.00Successfully Added to your Shopping CartAdding to Cart... -
￩￫
Bekyns Stainless Steel Cradle Band Straps for 80 Gallon Rectangular Vertical Utility Tanks
$235.00ANTI-CORROSIVE INDUSTRIAL STAINLESS STEEL, STRONG, DURABLE, SPACE-SAVING, LOW-PROFILE, EASY TO INSTALL
- Compatible with vertical tanks measuring 27"W x 18"D x 40-44"H including the popular Ace Roto-Mold SP0080-RT
- Made of strong 3" wide 16 gauge stainless steel
- Semi-rigid for strength with enough flexibility to fit snugly around tanks to save space on your vehicle's deck
- Corrosion resistant and durable
- Proprietary design with easy to adjust middle band helps control bulging
- Easy to install on your vehicle's deck with standard bolts (no need for J bolts)
- We recommend mounting with load stabilizing plates and lock nuts under vehicle's bed
- Comes in 4 pieces easily assembled at middle band
- Dimensions: 27"W x 18"D x 22 H
- Tank not included with purchase
See full description for more detailMaximum quantity exceededMinimum purchase amount of 0 is requiredBekyns Stainless Steel Cradle Band Straps for 80 Gallon Rectangular Vertical Utility Tanks
$235.00Successfully Added to your Shopping CartAdding to Cart...