Hygea 20HLP Skid - Low Profile 20 GPM Hot Pressure Washing System
- Description
- Specifications
HYGEA HOT HIGH FLOW INDUSTRIAL EXTERNAL CLEANING SERIES
HYGEA 20HLP SKID
Sits below 6'4" and within standard 8' pickup truck footbed to navigate parking garage with ease and maximize productivity.
Works as complete unit or with our reclaim & recycling rigs when reclaiming waste waters is required by local regulations.
Up to 4 operators can clean at the same time.
Equally productive for parking lots and industrial facilities.
With over 20 years in the business of building and servicing water and chemical treatment systems of all kinds, we've learned a few things about component reliability, durability, and serviceability. We select all components and materials carefully, and pay close attention to details, to build highly efficient, productive, and long-lasting rigs.
Built To Order and customizable.
Time to build: 15-30 business days depending customizations and equipment availability.
- Aluminum Skid
- Sits flat on floor of standard 8 ft pick up bed or on a trailer if preferred.
- Removable hose reel rack: gives access to work on equipment for maintenance or repairs.
- Skinny aluminum rack above wheel for one of the fuel tanks, allows setup to remain within bed footprint.
- Aluminum and stainless steel brackets, straps, and fasteners throughout for better corrosion control.
- Equipment
- 2 x 10 GPM Hot water PW - w/Customized stands to remain at height requirements below 6'4".
- IGX800 Honda engines, gear drive because of bed space limitations.
- TSF2221 10 GPM General Pumps.
- 2 x Vertical hotboxes w/Becket burners (better heat, smaller footprint).
- Custom easy-access hot box controls: built to attach on top of bed edge for easy access.
- Controls wired into engine: when shut engines off you don't have to worry about killing the battery by having the blower still running on burner.
- Custom feed and drain manifold - 1.5" single drain and feed line off the tank, split, taken into a custom mount that goes into 2 filters and valves, that feed the two pumps.
- Custom easy-access oil drains: extended to go over the sides of the bed to avoid getting oil on bed when draining.
- 225 gal horizontal leg buffer tank.
- 2 x water hose inlet to keep up with high water flow needs.
- 1" drain line.
- Auto shut off valve.
- 2 x garden hoses on 12" Hannay manual steel hose reels on each side.
- When using unit alone hoses connect directly to spigots.
- When using with reclaim & recycle rig, they tie in to pumps in recycle system.
- 2 x 200 1/2" pressure hoses on 18" Hannay manual steel hose reels.
- 2 x 10 GPM Hot water PW - w/Customized stands to remain at height requirements below 6'4".
- Payload and length requirements
- Minimum payload of 7000 lbs and bed must be at least 8 ft long.
- Customization options (pricing will vary accordingly)
- Substitute Hannay manual reels for Electric Titan reels.
- Substitute Hannay for Titan Aluminum reels (manual or electric)
- Add Lights: flood, in tank, LED.
- Substitute 10 GPM power washers for 8 GPM.
- Reduce to only 1 hot box for one of the Pressure washers.
- Increase skid length and tank size (only possible for trailers longer than 8 ft)
- Place reels at end of longer trailer instead of on top of equipment (only possible for trailers longer than 8 ft)
Manufacturer guarantees on all components.
Truck not included in purchase.
Designed to work seamlessly with the Hydra 8HHL Reclaim and Recycle trailer
Questions, customizations, financing, ready to order? call, or text us at 713-370-7033 or email us at sales@flowtechsys.com or use inquiry form.
- See description
Related Products
-
￩￫
Triton 8CSS - Commercial External Cleaner Truck Build
TRITON COMMERCIAL EXTERNAL CLEANING SERIES
TRITON 8CSS: Power Wash | Softwash | Surface Clean - Ideal for commercial buildings, windows, parking lots, and residential for crews of 2-4.
With over 20 years in the business of building and servicing water and chemical treatment systems of all kinds, we've learned a few things about reliability, durability, and serviceability. This is why we select all components and materials carefully, and pay close attention to details, to build highly effective, productive, and long-lasting rigs.
Built To Order on your flatbed truck (or trailer), and fully customizable.
See description below for a more detailed look.
Time to build: 20-25 days depending on condition of truck bed and customizations.
QUESTIONS ON PRICING, CUSTOMIZATIONS, OR FINANCING? Use inquiry form or contact us at 713-370-7033 or email us at sales@flowtechsys.com.Apply for Financing!Triton 8CSS - Commercial External Cleaner Truck Build
Successfully Added to your Shopping CartAdding to Cart... -
Hydra R5H - Reclaim & Recycle Trailer Commercial External Cleaning
HYDRA R5H - HYDRA RECOVER/RECLAIM RIGS SERIES
Complete Trailer Commercial Recovery & Recycle External Cleaning Trailer with electric vacuum 5 micron multi-stage water filtering system, 5.5 GPM Hot Water PW.
For garage, parking lots, industrial facilities, marinas, and other external cleaning where regulations require wastewater reclamation and recycling.
With over 20 years in the business of building and servicing water and chemical treatment systems of all kinds, we've learned a few things about reliability, durability, and serviceability. This is why we select all components and materials carefully, and pay close attention to details, to build highly effective, productive, and long-lasting rigs.
Built To Order and fully customizable.
See description tab below for a more detailed look.
Time to build: 25-30 days depending on condition of truck bed and customizations.
QUESTIONS ON PRICING, CUSTOMIZATIONS, OR FINANCING? Use inquiry form or contact us at 713-370-7033 or email us at sales@flowtechsys.com.Apply for Financing!Hydra R5H - Reclaim & Recycle Trailer Commercial External Cleaning
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
Hydra 20G8HL - Reclaim & Recycle - Powerful System for 8 Hours or More Continuous Cleaning Before Water Change
HYDRA RECLAIM & RECYCLE SERIES
HYDRA 20G8HL - CONFIGURED FOR HEAVY DUTY CLEANING (PARKING GARAGES, OILFIELD EQUIPMENT, FLEETS, STADIUMS, ETC)
8 hours continuous cleaning before water change with 20+ GPM combined flow in typical dirty parking garage conditions.
How? We engineered a new system using advanced filtration and chemical cleaning technologies combining our fracking industry and external cleaning experience.
For over 20 years, industry leaders have trusted us to deliver water and chemical treatment systems that perform. By combining proven expertise with a commitment to quality, we engineer systems that reduce downtime, cut maintenance costs, and maximize long-term value. Every rig we build reflects our focus on performance, productivity, and a measurable return on investment.
Differentiating Capabilities:
- 8 hours continuous cleaning before water change with 20+ GPM combined flow in typical dirty parking garage conditions.
- Filtered to 5-micron levels
- Proprietary multi-level physical and chemical filtering
- Built-in polishing filter redundancy allows you to clean one set while operations keep going
- Low profile: as low as 6'4" ft in height on custom narrow trailer with a total width of 7.4" (6' bed) to navigate low garage parking entrances
Built To Order | Fully customizable for all types of external cleaning.
SEE DESCRIPTION TAB BELOW FOR MORE DETAILS.
Time to build: 30-50 business days depending on availability of components and customizations
QUESTIONS ON PRICING, CUSTOMIZATIONS, OR FINANCING? Contact us at 713-370-7033 or email us at sales@flowtechsys.com.Apply for Financing!Hydra 20G8HL - Reclaim & Recycle - Powerful System for 8 Hours or More Continuous Cleaning Before Water Change
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
Triton 10H20S - Dual 10GPM PW and 20 GPM Air Pump Softwash
TRITON COMMERCIAL EXTERNAL CLEANING SERIES
TRITON 10H20S: Industrial Hot Power Wash | Softwash - Ideal for greasy conditions, commercial and industrial buildings, windows, parking lots, and residential for crews of 2-4.
With over 20 years in the business of building and servicing water and chemical treatment systems of all kinds, we've learned a few things about reliability, durability, and serviceability. This is why we select all components and materials carefully, and pay close attention to details, to build highly effective, productive, and long-lasting rigs.
Built To Order on your 12' flatbed truck (or trailer), and fully customizable.
See description below for a more detailed look.
Time to build: 25-30 days depending on condition of truck bed and customizations.
QUESTIONS ON PRICING, CUSTOMIZATIONS, OR FINANCING? Use inquiry form or contact us at 713-370-7033 or email us at sales@flowtechsys.com.Apply for Financing!Triton 10H20S - Dual 10GPM PW and 20 GPM Air Pump Softwash
Successfully Added to your Shopping CartAdding to Cart...