BAND STRAPS & BRACKETS

We developed these plates especially to mount heavier equipment on wood decks that may become damaged from use in harsh chemical or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.

See additional images or full description for installation videos and additional details

- 4" wide x 4"long x 1/4" thick (3 Gauge) heavy duty and anti-corrosive aluminum
- Proprietary design with 2 holes 1/2" each for more options in placing equipment: 
---> Center hole is preferred hole for best weight distribution
---> The hole closer to the edge allows you to install the plate close to obstructions under the trailer or truck beds (such as cross members)
- Hand finished and individually inspected for quality
- 4 Plates in each order
- Other fasteners (such as washers, bolts, nuts) not included with purchase.

See full description for installation videos and more details.

STRONG AND ANTI-CORROSIVE 1/4 INCH ALUMINUM

Help prevent tanks from shifting on decks. Provide extra stability when used in addition to band straps

- Heavy duty and corrosion resistant 1/4 thick aluminum
- 3" wide x 3"tall x 5" long x 1/4" thick (3 Gauge)
- 2 mounting holes 1/2" each
- For 3/8" bolts or smaller
- Hand finished and individually inspected for quality
- 2 brackets in each order
- Fasteners (such as washers, bolts, nuts) not included with purchase.
- We recommend using stainless steel fastener for best corrosion control. 

See full description for more details.

ANTI-CORROSIVE 304 INDUSTRIAL STAINLESS STEEL, STRONG, DURABLE, SPACE-SAVING, LOW-PROFILE, EASY TO INSTALL

- Compatible with 7 Gallon portable rectangular flat-bottom tanks Den Hartog USP0007, Norwesco 44852, Ace Roto-Mold SP0007
- Made of strong 2" wide 16 gauge 304 brushed industrial stainless steel
- Low profile, semi-rigid and space-saving - they fit snugly in the tank's strap grooves
- Easy to install on your vehicle's deck with standard bolts
- Each strap is 15" high x 9" deep x 2" wide.  Feet 1.5" deep 
- Set of 2 straps
- Tank not included in purchase

See description and specs below for more details.

ANTI-CORROSIVE 304 INDUSTRIAL STAINLESS STEEL, DURABLE, SPACE-SAVING, LOW-PROFILE, EASY TO INSTALL

Free Shipping to lower 48 states on orders over $250.00 

- Compatible with the Scepter 9 Gal Scepter Rectangular Marine Fuel Tank #08667
- Made of strong 2" wide 16 gauge 304 industrial stainless steel
- 16 gauge is about the thickness of a quarter
- Low profile, semi-rigid and space-saving - they fit snugly in the tank's strap grooves
- Easy to install on your vehicle's deck with standard bolts
- Each strap is 9" high x 13.25" wide.  Feet 1.5" deep 
- Set of 2 straps
- Tank not included in purchase

See description and specs for more details.

ANTI-CORROSIVE 304 INDUSTRIAL STAINLESS STEEL, STRONG, DURABLE, SPACE-SAVING, LOW-PROFILE, EASY TO INSTALL

- Compatible with the Scepter 12 Gal Scepter Rectangular Marine LOW PROFILE Fuel Tank #08669
- Made of strong 2" wide 16 gauge 304 industrial stainless steel
- 16 gauge is about the thickness of a quarter
- Low profile, semi-rigid and space-saving - they fit snugly in the tank's strap grooves
- Easy to install with standard bolts (no need for J bolts) 
- Each strap is 9" high x 17" wide.  Feet 1.5" deep 
- Set of 2 straps
- Tank not included in purchase

See description and specs below for more details.

ANTI-CORROSIVE INDUSTRIAL STAINLESS STEEL, STRONG, DURABLE, SPACE-SAVING, LOW-PROFILE, EASY TO INSTALL

Free shipping to lower 48 states for orders above $250

- Compatible with the Scepter 12 Gal Scepter Rectangular Marine HIGH PROFILE Fuel Tank #08668
- Made of strong 2" wide 16 gauge industrial stainless steel
--> 16 gauge is about the thickness of a quarter
- Low profile, semi-rigid and space-saving - they fit snugly in the tank's strap grooves
- Easy to install on your vehicle's deck with standard bolts (no need for J bolts) 
- Each strap is 11.5" high x 13.25" wide.  Feet 1.5" deep 
- Set of 2 band straps

Tank not included in purchase

See description and specs below for more details.

STRONG AND ANTI-CORROSIVE 1/4 INCH ALUMINUM

Help prevent tanks from shifting on decks. Provide extra stability when used in addition to band straps

- Heavy duty and corrosion resistant 1/4 thick aluminum
- 3" wide x 3"tall x 5" long x 1/4" thick (3 Gauge)
- 2 mounting holes 1/2" each
- For 3/8" bolts
- Hand finished and individually inspected for quality
- Cost effective and easy to install
- 4 brackets in each order
- Fasteners (such as washers, bolts, nuts) not included with purchase.
- We recommend using stainless steel fasteners for best corrosion control. 

See full description for video and more details.

ANTI-CORROSIVE INDUSTRIAL STAINLESS STEEL, STRONG, DURABLE, SPACE-SAVING, LOW-PROFILE, EASY TO INSTALL

Free Shipping to lower 48 states on orders over $250

- Shaped specifically to fit the domed shape of the Romotech #82123879 water utility storage tank
- Made of strong 2" wide 16 gauge industrial stainless steel
--> 16 gauge is about the thickness of a quarter
- Low profile and space-saving - they fit snugly in the tank's strap grooves.
- Dimensions: 14" high at top of dome x 11" deep x 2" wide.  Feet are 1.5" deep 
- Set of 2 straps
- Tank not included in purchase

See full description for more details.

ANTI-CORROSIVE 304 INDUSTRIAL STAINLESS STEEL, STRONG, DURABLE, SPACE-SAVING, LOW-PROFILE, EASY TO INSTALL

Free Shipping to lower 48 states on orders over $250.00 

- Compatible with 26 Gallon tanks Den Hartog/Ace Roto-Mold SP0026 and Norwesco 43835 rectangular tanks
- Made of strong 2" wide 16 gauge industrial stainless steel
--> 16 gauge is about the thickness of a quarter
- Low profile and space-saving - they fit snugly in the tank's strap grooves.
- Dimensions: 15.75" high x 17" deep x 2" wide.  Feet 1.5" deep
- Set of 2 straps
- Tank not included in purchase

See full description and specifications below for more details.

ANTI-CORROSIVE INDUSTRIAL STAINLESS STEEL, STRONG, DURABLE, SPACE-SAVING, LOW-PROFILE, EASY TO INSTALL

Free Shipping to lower 48 states on orders over $250

- Compatible with the domed utility flat-bottom tank Romotech #82123889 
- Made of strong 2" wide 16 gauge industrial stainless steel
--> 16 gauge is about the thickness of a quarter
- Low profile and space-saving - they fit snugly in the tank's strap grooves.
- Dimensions: 14" high at top of dome x 15" deep x 2" wide.  Feet are 1.5" deep 
- Set of 2 straps
- Tank not included in purchase

See full description for more details.