￩
￫
Aluminum 4X4" Mounting Load Distribution Plates (Washers, Brackets) - Set of 3

Aluminum 4X4" Mounting Load Distribution Plates (Washers, Brackets) - Set of 3

$27.00
We developed these plates especially to mount heavier equipment on truck and trailers for use in harsh chemical or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.

- 4" wide x 4"long x 1/4" thick (3 Gauge) heavy duty and anti-corrosive aluminum
- Proprietary design with 2 holes 1/2" each for more options in placing equipment: 
---> Center hole is preferred hole for best weight distribution
---> The hole closer to the edge allows you to install the plate close to obstructions under the trailer or truck beds (such as cross members)
- Hand finished and individually inspected for quality
- 3 Plates in each order
- Other fasteners (such as washers, bolts, nuts) not included with purchase.

See full description for installation videos and more details.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
￩
￫
Aluminum Mounting L-Shaped Prevention Brackets - Set of 2

Aluminum Mounting L-Shaped Prevention Brackets - Set of 2

$30.00
STRONG AND ANTI-CORROSIVE 1/4 INCH ALUMINUM

The plates are especially useful when full tanks must travel on roads where equipment is subjected to strong movements.

- 3" wide x 3"tall x 5" long x 1/4" thick (3 Gauge)
- 2 mounting holes 7/16" each
- Heavy duty and corrosion resistant 1/4 thick aluminum
- For 3/8" bolts or smaller
- Hand finished and individually inspected for quality
- 2 Plates in each order
- Cost effective and easy to install
- Fasteners (such as washers, bolts, nuts) not included with purchase.
- We recommend using stainless steel fastener for best corrosion control. 

See full description for more details.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
￩
￫
Aluminum 4X4" Mounting Load Distribution Plates (Washers, Brackets) - Set of 4

Aluminum 4X4" Mounting Load Distribution Plates (Washers, Brackets) - Set of 4

$36.00
We developed these plates especially to mount heavier equipment on truck and trailers for use in harsh chemical or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.

- 4" wide x 4"long x 1/4" thick (3 Gauge) heavy duty and anti-corrosive aluminum
- Proprietary design with 2 holes 1/2" each for more options in placing equipment: 
---> Center hole is preferred hole for best weight distribution
---> The hole closer to the edge allows you to install the plate close to obstructions under the trailer or truck beds (such as cross members)
- Hand finished and individually inspected for quality
- 4 Plates in each order
- Other fasteners (such as washers, bolts, nuts) not included with purchase.

See full description for installation videos and more details.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
￩
￫
Aluminum Mounting L-Shaped Shift Prevention Brackets - Set of 4

Aluminum Mounting L-Shaped Shift Prevention Brackets - Set of 4

$55.00
STRONG AND ANTI-CORROSIVE 1/4 INCH ALUMINUM

The plates are especially useful when full tanks must travel on roads where equipment is subjected to strong movements.

- 3" wide x 3"tall x 5" long x 1/4" thick (3 Gauge)
- 2 mounting holes 7/16" each
- Heavy duty and corrosion resistant 1/4 thick aluminum
- For 3/8" bolts or smaller
- Hand finished and individually inspected for quality
- 4 Plates in each order
- Cost effective and easy to install
- Fasteners (such as washers, bolts, nuts) not included with purchase.
- We recommend using stainless steel fastener for best corrosion control. 

See full description for more details.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
￩
￫
3 Valve Remote Softwash Proportioner for Electric Pumps - Flowportioner RME3

3 Valve Remote Softwash Proportioner for Electric Pumps - Flowportioner RME3

$2,070.00 - $2,230.00
3 sizes 1", 3/4", 1/2"
3 VALVE REMOTE SOFTWASH PROPORTIONER: HAYWARD VALVES, POLYPROPYLENE, CAMLOCKS, ON REINFORCED ALUMINUM FRAME FOR USE WITH ELECTRIC POWERED SOFTWASH PUMPS.

Remote control enables full operation without having to get off roofs or ladders and walk to and from softwash system location. It has 5 functions:

1- SH Blend: Opens and closes SH (Bleach) valve to blend with water at the pre-selected ratio.  Easily set the ratio with our custom large metering labels.
2- Soap Blend: Opens and closes soap valve to blend with water at the pre-selected ratio.  Easily set the ratio with our custom large metering labels.
3 - Soap + SH: Opens both soap and SH valves to blend simultaneously with water at each pre-selected ratios.
4 - Water : shuts off SH and Soap to pre-treat or rinse surfaces with water.
5 - Valve Rinse: Flushes the SH valve and hoses with water  at the end of cleaning.  

Check full description and specs for more details
Select Options
￩
￫
3 Valve Remote Softwash Proportioner for Gasoline Pumps - Flowportioner RMG3

3 Valve Remote Softwash Proportioner for Gasoline Pumps - Flowportioner RMG3

$2,110.00 - $2,270.00
3 VALVE REMOTE SOFTWASH PROPORTIONER: HAYWARD VALVES, POLYPROPYLINE, CAMLOCKS, ON REINFORCED ALUMINUM FRAME FOR USE WITH GASOLINE POWERED SOFTWASH PUMPS |
3 sizes 1", 3/4", 1/2"

Remote control enables full operation without having to get off roofs or ladders and walk to and from softwash system location. It has 5 functions:

1- SH Blend: Opens and closes SH (Bleach) valve to blend with water at the pre-selected ratio.  Easily set the ratio with our custom large metering labels.
2- Soap Blend: Opens and closes soap valve to blend with water at the pre-selected ratio.  Easily set the ratio with our custom large metering labels.
3 - Soap + SH:  Opens both soap and SH valves to blend simultaneously with water at each pre-selected ratios.
4 - Water : shuts off SH and Soap to pre-treat or rinse surfaces with water.
5 - Valve Rinse: Flushes the SH valve and hoses with water  at the end of cleaning.  

Check full description and specs for more details
Select Options
￩
￫
4 Valve Remote Softwash Proportioner for Electric and Air Pumps - Flowportioner RME4

4 Valve Remote Softwash Proportioner for Electric and Air Pumps - Flowportioner RME4

$2,305.00 - $2,515.00
4 VALVE REMOTE SOFTWASH PROPORTIONER FOR ELECTRIC PUMPS:  HAYWARD VALVES, POLYPROPYLINE, CAMLOCKS, ON REINFORCED ALUMINUM FRAME FOR USE WITH ELECTRIC POWERED SOFTWASH PUMPS |
3 sizes 1", 3/4", 1/2"

Allows a single operator to safely complete a full cleaning cycle without the need to go back and forth to the rig to turn valves on and off, or the need for an assistant. 

Remote Functions:
1) SH Blend: Turns SH on and off to blend with water at preset rate. Easily set the ratio with our custom large metering labels.
2) Soap Blend: Turns Soap on and off to blend with water at preset rate. Easily set the ratio with our custom large metering labels.
3) SH+Soap: Turns both SH and Soap to blend with water simultaneously.
4) Water: Turns off SH and Soap to spray only water for pretreating or rinsing.
5) Third Chemical Blend: Turns on the 4th valve that can be hooked up to a third chemical (like degreaser or neutralizer) when soap and SH are shut off.  The remote has a safety feature that won't allow the third chemical to turn on if SH and Soap are on.
6) Valve Rinse: Flushes out the SH valve and hoses after the other valves are turned off. The system has a safety feature that won't allow valve rinse function until other valves are shut off.

See description and specs for full details
Select Options
￩
￫
4 Valve Softwash Remote Proportioner For Gasoline Pumps - Flowportioner RMG4

4 Valve Softwash Remote Proportioner For Gasoline Pumps - Flowportioner RMG4

$2,345.00 - $2,555.00
PROPORTIONER MIXING VALVES WITH REMOTE CONTROL: HAYWARD VALVES, POLYPROPYLINE, CAMLOCKS, ON REINFORCED ALUMINUM FRAME FOR USE WITH GASOLINE POWERED SOFTWASH PUMPS |
3 sizes 1", 3/4", 1/2"

Allows a single operator to safely complete a full cleaning cycle without the need to go back and forth to the rig to turn valves on and off, or the need for an assistant. 

Remote Functions:
1) SH Blend: Turns SH on and off to blend with water at preset rate. Easily set the ratio with our custom large metering labels.
2) Soap Blend: Turns Soap on and off to blend with water at preset rate. Easily set the ratio with our custom large metering labels.
3) SH+Soap: Can turn both SH and Soap together to blend with water.
4) Rinsing: turn off SH and Soap and spray only water for rinsing.
5) Third Chemical Blend: Turns on the 4th valve that can be hooked up to a third chemical (like degreaser or neutralizer) when soap and SH are shut off.  The remote has a safety feature that won't allow the third chemical to turn on if SH and Soap are on.
6) Valve Rinse: Flushes out the SH valve and hoses after the other valves are turned off. The system has a safety feature that won't allow valve rinse function until other valves are shut off.

See description and specs for full details
Select Options
Python 882 - Sewage Plumbing Hydro Jetter 8ft Trailer 8 GPM@3000 Cold PW 200' Jetter Hose 225 gal tank

Python 882 - Sewage Plumbing Hydro Jetter 8ft Trailer 8 GPM@3000 Cold PW 200' Jetter Hose 225 gal tank

PYTHON COMMERCIAL HYDRO-JETTER SERIES 

PYTHON 882: Plumbing Hydro-Jetter 8ft Trailer: 8' Heavy duty 3.5K single axle trailer, 8 GMP @3000 PSI Cold PW, 200' Jetter Hose, 225 gal tank

With over 20 years in the business of building and servicing water and chemical treatment systems of all kinds, we've learned a few things about reliability, durability, and serviceability.  This is why we select all components and materials carefully, and pay close attention to details, to build highly effective, productive, and long-lasting rigs. 

Built To Order and fully customizable. 

See description below for a more detailed look.

Time to build: 25-30 days depending on condition of truck bed and customizations.

QUESTIONS ON PRICING, CUSTOMIZATIONS, OR FINANCING? Use inquiry form or contact us at 713-370-7033 or email us at sales@flowtechsys.com.   
Select Options
PYTHON 1212 - Plumbing Sewage Hydro-Jetter 12' tandem 12 GMP 2500 PSI Cold PW, 300' Jetter Hose, 335 gal tank

PYTHON 1212 - Plumbing Sewage Hydro-Jetter 12' tandem 12 GMP 2500 PSI Cold PW, 300' Jetter Hose, 335 gal tank

PYTHON COMMERCIAL HYDRO-JETTER SERIES 

PYTHON 1212: Plumbing Hydro-Jetter Trailer: 12' 3.5K Tandem trailer, 12 GMP @2500 PSI Cold PW, 300' Jetter Hose, 335 gal tank, 60" tool box.

With over 20 years in the business of building and servicing water and chemical treatment systems of all kinds, we've learned a few things about reliability, durability, and serviceability.  This is why we select all components and materials carefully, and pay close attention to details, to build highly effective, productive, and long-lasting rigs. 

Built To Order and fully customizable. 

See description below for a more detailed look.

Time to build: 25-30 days depending on condition of truck bed and customizations.

QUESTIONS ON PRICING, CUSTOMIZATIONS, OR FINANCING? Use inquiry form or contact us at 713-370-7033 or email us at sales@flowtechsys.com.   
Select Options
￩
￫
Triton 8CSS - Commercial External Cleaner Truck Build

Triton 8CSS - Commercial External Cleaner Truck Build

TRITON COMMERCIAL EXTERNAL CLEANING SERIES
TRITON 8CSS: Power Wash | Softwash | Surface Clean - Ideal for commercial buildings, windows, parking lots, and residential for crews of 2-4.

With over 20 years in the business of building and servicing water and chemical treatment systems of all kinds, we've learned a few things about reliability, durability, and serviceability.  This is why we select all components and materials carefully, and pay close attention to details, to build highly effective, productive, and long-lasting rigs. 

Built To Order on your flatbed truck (or trailer), and fully customizable. 

See description below for a more detailed look.

Time to build: 20-25 days depending on condition of truck bed and customizations.

QUESTIONS ON PRICING, CUSTOMIZATIONS, OR FINANCING? Use inquiry form or contact us at 713-370-7033 or email us at sales@flowtechsys.com.   
Select Options
Hydra R5H - Reclaim & Recycle Trailer Commercial External Cleaning

Hydra R5H - Reclaim & Recycle Trailer Commercial External Cleaning

HYDRA R5H - HYDRA WASTEWATER RECOVER AND RECLAIM RIGS SERIES

For parking lots, industrial facilities, and other external cleaning where regulations require wastewater reclamation and recycling.

With over 20 years in the business of building and servicing water and chemical treatment systems of all kinds, we've learned a few things about reliability, durability, and serviceability.  This is why we select all components and materials carefully, and pay close attention to details, to build highly effective, productive, and long-lasting rigs. 

Built To Order on your flatbed truck (or trailer), and fully customizable. 

See description below for a more detailed look.

Time to build: 25-30 days depending on condition of truck bed and customizations.

QUESTIONS ON PRICING, CUSTOMIZATIONS, OR FINANCING? Use inquiry form or contact us at 713-370-7033 or email us at sales@flowtechsys.com.   
Select Options
￩
￫
Triton 10H20S - Dual Cold 10GPM Hot 10GPM High Flow 20 GPM Air Softwash 24 SCFM Compressor

Triton 10H20S - Dual Cold 10GPM Hot 10GPM High Flow 20 GPM Air Softwash 24 SCFM Compressor

TRITON COMMERCIAL EXTERNAL CLEANING SERIES
TRITON 10H20S: Industrial Hot Power Wash | Softwash  - Ideal for greasy conditions, commercial and industrial buildings, windows, parking lots, and residential for crews of 2-4.

With over 20 years in the business of building and servicing water and chemical treatment systems of all kinds, we've learned a few things about reliability, durability, and serviceability.  This is why we select all components and materials carefully, and pay close attention to details, to build highly effective, productive, and long-lasting rigs. 

Built To Order on your 12' flatbed truck (or trailer), and fully customizable. 

See description below for a more detailed look.

Time to build: 25-30 days depending on condition of truck bed and customizations.

QUESTIONS ON PRICING, CUSTOMIZATIONS, OR FINANCING? Use inquiry form or contact us at 713-370-7033 or email us at sales@flowtechsys.com. 
Select Options
￩
￫
Hydra G208H - Reclaim & Recycle - Powerful System for 8 Hours or More Continuous Cleaning Before Water Change

Hydra G208H - Reclaim & Recycle - Powerful System for 8 Hours or More Continuous Cleaning Before Water Change

TRITON COMMERCIAL and INDUSTRIAL EXTERNAL CLEANING SERIES
TRITON 10H20S: Industrial Hot Power Wash | Softwash  - Parking Garages, Fleets, Oilfield Equipment, Buildings, Surfaces

For over 20 years, industry leaders have trusted us to deliver water and chemical treatment systems that perform. By combining proven expertise with a commitment to quality, we engineer systems that reduce downtime, cut maintenance costs, and maximize long-term value. Every rig we build reflects our focus on performance, productivity, and a measurable return on investment.

Built To Order.
 
See description below for a more detailed look.

Time to build: 25-30 days depending on condition of truck bed and customizations.

QUESTIONS ON PRICING, CUSTOMIZATIONS, OR FINANCING? Use inquiry form or contact us at 713-370-7033 or email us at sales@flowtechsys.com.   
Select Options
X

Categories: